At full power this inverter draws 186.7 A from a 12 V bank and 373 A during a 4,000 W surge. That figure divides 2,000 W by 12.6 V under load and by 85 % efficiency, not the 90 % on the datasheet, because peak efficiency is not what you get at full load.
It is pure sine, so compressors, pumps and a CPAP machine run on it without the heating a modified-sine output causes.
For scale, two 100 Ah lithium batteries (2,560 Wh usable) run it at half power, 1,000 W, for about 2.1 hours. Idle it consumes 24.0 W, which is 576 Wh a day if you leave it on around the clock. To a lithium bank, a battery cable of 0.5 m needs 1/0 with a 250 A fuse and 1.5 m needs 1/0 AWG with a 250 A Class T fuse; the fuse is the smallest rating above 1.25 × the draw that still protects the wire (ABYC E-11).
Smallest battery bank that carries it
| Battery | In parallel | Bank | Limited by |
|---|---|---|---|
| Battle Born Batteries BBGC3 270Ah 12V GC3 LiFePO4 | 1 | 270 Ah | continuous |
| Battle Born Batteries BBGC3H 270Ah 12V GC3 LiFePO4 Heated | 1 | 270 Ah | continuous |
| LiTime 12V 460Ah LiFePO4 | 1 | 460 Ah | continuous |
| LiTime 12V 200Ah Xtra Mini RV Smart LiFePO4 | 2 | 400 Ah | continuous |
| LiTime 12V 230Ah Plus LiFePO4 | 2 | 460 Ah | continuous |
| LiTime 12V 320Ah Mini Smart Self-Heating LiFePO4 | 2 | 640 Ah | continuous |
| Renogy Core 12V 200Ah LiFePO4 w/ Bluetooth | 2 | 400 Ah | continuous |
| Renogy Core 12V 300Ah LiFePO4 w/ Self-Heating | 2 | 600 Ah | continuous |
Datasheet
| Field | Value |
|---|---|
| Continuous / surge | 2,000 W / 4,000 W |
| Input | 12 V (10.5–16.5 V) |
| Waveform | pure-sine |
| Efficiency (published) | 90 % |
| Idle draw | 24.0 W |
Source: manufacturer documentation
Where to buy
As an Amazon Associate and through direct retailer programs, this site earns from qualifying purchases — see how.
No direct manufacturer program is joined yet (§13.3); an image and a dollar figure means this is a specific listing checked via the Amazon Creators API, not a plain search.
How this page was computed
Published efficiency is a peak figure, so current is computed at 85 %. Cable and fuse follow the checker: ABYC E-11 ampacity, 3 % drop, fuse ≥ 1.25 × draw and ≤ the wire rating, Class T for lithium.
- Manufacturer documentation verified 2026-09-15
- Battery datasheets BMS continuous and peak
The formulas are the same open engine the checker runs; the methodology page lists every constant.
These results are for reference. Wiring must be installed by a qualified electrician. Mobile installations follow ABYC E-11; stationary ones NEC 690/706.